Why Three Stages of Operating Training Are Essential

The workplace is becoming extremely fast-paced and in many times machine operators are giving control of vehicles they may not understand and have to do work they are unfamiliar with which can lead to catastrophic conditions.

The vast majority of employers believe that their machine operators are qualified it once they have been able to pass basic operator training. However, regardless of how good basic training is, it is essential that it is been backed up by specific job and familiarisation training before the employee is allowed to operate in the workplace.

Understanding the Particular Stages of Operator Training

Basic Operator Training

Basic operator training is exactly what you would expect it to be. It is important to understand that basic operating training should always take place while not on the job. Typically an individual who is attending basic operator training is going to learn the basics of operating a lift truck which include manoeuvring and basic hydraulic controls in order to get a better understanding of the safe operation.

“In addition to learning to operate the machine, individuals learn about the hazards and risks that are associated with the operation.” says an operator trainer at Pallet Trucks Direct. Throughout the training skills such as routine maintenance and pre-use inspection are covered as well.

Specific Job Training

Specific job training is the next step of training in which you learn more than just the basic skills. Typically the individual is going to learn about operating principles that are specific to the equipment that they use on a daily basis as well as any additional attachments.

The operator learns about the configuration and layout of the controls of the type of machine they use, considering they more than likely will not be using an identical machine they used in basic operating training.

However, everything is not about the machine at this point, specific job training allows the individual to learn about typical conditions they may encounter while at work, for example racking systems, confined areas, cold stores, as well as other vehicles and services they may work with.

In addition, it is during specific job training that the operator will be instructed about on-site rules such as pedestrian areas, speed limits, traffic flow as well as Personal Protective Equipment.

Just as basic operating training takes place away from the job the same is true for specific job training. Many times it is combined with basic operating training and is either practical or theoretical, as this is dependent upon the availability of appropriate and safe training areas.

Familiarisation Training

This form of training closely supervised and will introduce the operator to a “live work” environment for the very first time. It is in this area that the knowledge and skills that have been gained throughout the first two stages of training will be put to test in the workplace. The operator will begin with simple tasks and work up towards more complex procedures which allows them to develop their skills as well as build their confidence throughout the training.

As with the prior training, layout and rules are going to be an important foundation of familiarisation training. Whereas there were some aspects of specific job training that was not able to be done because of the all the job nature, this form of training will be able to cover them.

Once an individual has completed all three of the stages satisfactorily should and “authorisation to operate” be issued. The employer will issue this and acknowledge the individual has been qualified to operate a specific type of equipment within a specific environment.

While looking at these three stages of the initial training, it is easy to see how basic training just on its own has the ability to leave an operator inexperienced and not fully understanding how to operate equipment in a live work environment.

The three-part training process is an essential aspect of creating a safe and secure work environment. In addition, operating training is an ongoing process that cannot stop at basic operating training or even specific job training it must always be part of the job.

Category Business

Multimag Comments

We love comments
No Comments Yet! You can be first to comment this post!

Only registered users can comment.